Home > Audi TT > Modifications > Oil Temp Sender/Gauge

Oil Temp Sender/Gauge

This is a quick write-up on installing an oil temperature sender and gauge on a 2001 Audi TT with 1.8T engine. It is not meant to be exhaustive, there is a good, complete how-to here (thanks Warren!): http://forums.audiworld.com/tt/msgs/1363085.phtml

Thumbnails

Album Comments

Widgets

rss

Slideshow

1 Lascar EMT 1900 and temp sender 1HO … Order print	2 Testing the sender Order print	3 Calibration Order print	4 Yep, that's boiling! Order print
5 Use yellow teflon tape Order print	6 The sender taped up. Order print	7 Dialectric grease for the connection… Order print	8 Install the sender. Order print
9 Location of installed sender. Order print	10 Connector with dialectric grease att… Order print	11 Drilling into the gauge cluster Order print	12 Hole completed. Order print
13 The gauge is nice and small. Order print	14 Thread the wiring through. Order print	15 Route the wire properly. Order print	16 Tighten down the gauge. Order print
17 Wiring soldered, ready for taping. Order print	18 Completed install. Order print	19 DSCN5057 Order print	20 DSCN5059 Order print
21 DSCN5056 Order print	22 DSCN5061 Order print	23 VDO 323-423 300F Oil Temp Sender M10… Order print	24 VDO 30-25boost 150-121 Order print
25 Sender installed (center of pic) Order print	26 DSCN9755 Order print	27 DSCN9754 Order print	28 DSCN9763 Order print
29 DSCN9760 Order print	30 DSCN9762 Order print

Welcome to MarTT's fotki!

Oil Temp Sender/Gauge

Oil Temp Sender/Gauge